A Simple Key For Container Chassis Unveiled
A Simple Key For Container Chassis Unveiled
Blog Article
only one landing equipment leg with equipment box (crankside) supported by its maker’s advised mounting bracket and brace attachment brackets is usually to be analyzed with its internal leg completely retracted.
Side panels are to generally be able to withstanding the racking imposed on the bottom container in the stack once the containers are carried on deck less than disorders affording confined exterior racking restraint.
the tip load is the combined static and dynamic load imposed through the cargo on the container partitions or doors, or each, which can be perpendicular towards the longitudinal axis in the container.
fifteen.9.1 Container Securing units Securing products are to be furnished for each container dimension for which the chassis is designed. All securing units are for being capable of getting locked and unlocked towards the corner fittings of both a loaded or unloaded container without having undue power.
Lifting spots may very well be offered for handling containers from the loaded or unloaded situation by the use of grappler arms or very similar gadgets. The lifting spots are to fulfill the location specifications laid out in Figure six.four.
The chassis would be to be capable of accepting the container loads from the vertical downward direction by a number of with the a few doable implies stated herein.
For minimum identification uses, Just about every container would be to be completely marked via the producer with the next information and facts:
The container underneath take a look at will be to be positioned in this type of manner the conclusion panel is free to deflect in excess of its complete surface. A load or drive equal to 0.four
A plate framework through which the kingpin neck and collar lengthen. The underside surface with the plate contacts the fifth wheel if the chassis is coupled.
*To assist purchasers in supplying the check here information needed for the certification of container chassis the Bureau has printed software kinds, readily available on ask for.
Containers using cryogenic fluids that have an operating temperature down below minus seventy threeºC (minus one hundredºF) as the cooling medium will likely be subject matter to Specific thought and particulars from the cooling arrangements are to be submitted for overview.
The container cooling unit is always to be capable of retaining the look interior temperature Along with the cooling device biking eighty% on and 20% off all through a 24-hour period of time at the look ambient air temperature. In case the unit is electrically driven, the bottom variation of voltage and the lowest frequency predicted in transit is to be used in deciding the required cooling capability as well as adequacy with the air circulating supporters.
A brake procedure which uses compressed air as a method of transmitting strain or drive from driver control to support brakes and crisis brakes.
Report this page